The reliable Falcon 2.0
The 2-rotor spreading adapter is 2.0 m wide for application of different fertilizers with a wide spreading range.
The 2-rotor spreading adapter is 2.0 m wide for application of different fertilizers with a wide spreading range.
Load capacity
6 000 kg
Load body volume capacity
7,7 m3
Power demand
85 HP
Load capacity
8 000 kg
Load body volume capacity
9,5 m3
Power demand
90 HP
Load capacity
10 000 kg
Load body volume capacity
11,7 m3
Power demand
100 HP
Load capacity
12 000 kg
Load body volume capacity
13,4 m3
Power demand
100 HP
Load Capacity
14 000 kg
Load body volume capacity
15,1 m3
Power demand
120 HP
Take a closer look
Explore the FALCON 2.0 from all sides with a 360° animation.
The single-axle chassis provides better manoeuvrability, proper tractor rear downforce, and good traction. It is perfect for operation in meadows and fields with reduced tire wear and low tire engagement into the ground. The large wheels reduce the adverse effects of soil compaction.
The FALCON 2.0 spreader features a hitch that has a longitudinal spring suspension system that reduces the dynamic loads on the drawbar eye while in operation. This improves the driving comfort when spreading manure. The structural design provides a lower loading level of the implement.
The N276 FALCON 2.0 spreaders feature a mechanical parking jack. The hydraulic scissor parking jack is optional and provides a smooth lifting adjustment when coupling the spreader to the tractor. This ensures a heavy spreader can be easily lifted.
The FALCON 2.0 features a 2.0 m wide vertical 2-rotor spreading adapter. The wider adapter provides better distribution of material, making your work with the implement more efficient. The two rotors are swept forward by 15°. The main working tips are replaceable blades bolted to the rotor segments. When rotating, the rotors shred the material feed and eject it to the back and the sides. The bottom section of the rotors features bladed discs, which increase the spreading width of the material.
The vertical adapter works well with fermented, non-fermented or dry manure. The working speed is 1000 rpm.
Each manure spreader features a chain floor conveyor. The speed of the floor conveyor is controlled by operating a knob on the hydraulic flow control valve. To meet the expectations of our customers, Metal-Fach has introduced electronic flow controllers operated with a control panel in the tractor cab. It is no longer required to leave the tractor to adjust the floor conveyor speed directly at the spreader.
The standard equipment features a spreading adapter mesh guard, which is removable by hand, with permanently attached side metal sheet deflectors. The side metal sheet deflectors reduce the side throw range, but their primary function is to guard the walls.
Otwieranie osłon odbywa się za pomocą hydrauliki z kabiny ciągnika, a dzięki zaworowi w prawej tylnej części rozrzutnika możemy ustawiać prawy deflektor do oczekiwanej pozycji.
The N276 Falcon 2.0 spreaders feature a rubber safety fender at the shaft in the bottom part of the spreading adapter. This prevents drawing the manure under the spreader.
The Falcon 2.0 has a vertical load body slide gate. It protects the adapter rotors from clogging during loading, and prevents the material from falling out in transport. The slide gate can control the application rate of loose material fed to the spreading adapter in operation.
The slide gate is braced on purpose with the heaviest gauge at its bottom to prevent deformation by the pressure of the material against the slide gate panel and its bottom edge. The slide gate lifts to open fully over Tecamid slides to minimise friction and retain a sealed passage of loose material in transport. The slide gate bottom features a rubber strip profiled around a chain to facilitate better conformity in contact with the body floor and an improved seal.
The equipment shown in the photos may vary with the chosen version.
| Model | N276/1 | N276 | N276/3 | N276/4 | N276/5 |
|---|---|---|---|---|---|
|
Load capacity [kg] |
6 000 |
8 000 |
10 000 |
12 000 |
14 000 |
|
Load body volume capacity [m3] |
7,7 |
9,5 |
11,7 |
13,4 |
15,1 |
|
Total length / width / height [mm] |
7970 / 2720 / 3030 |
7970 / 2720 / 3140 |
8970 / 2820 / 3140 |
8970 / 2820 / 3290 |
8970 / 2870 / 3440 |
|
Load body inner dimensions
length / width (top to bottom) / height
[mm] |
4725 / 1500-1950 / 1050 |
4725 / 1500-1950 / 1250 |
5725 / 1500-1950 / 1250 |
5725 / 1500-1950 / 1400 |
5725 / 1500-1950 / 1550 |
|
Loading height [mm] |
2290 |
2490 |
2490 |
2640 |
2790 |
|
Power demand [HP] |
85 |
90 |
100 |
120 |
120 |
Load Capacity 16; 18 T
Load Capacity 6; 8; 10 T
Load Capacity 6; 8; 10 T
